Marble and ceramics Tile Cleaner Formulation

$ 65

Category:
Quick Checkout
Description

Description

Creating a marble and ceramics tile cleaner formulation involves blending various ingredients to effectively remove dirt, grime, and stains while being safe for the surfaces.  It not only provides a glazing effect but is also used as a binder for the ceramic tiles. It increases the brightness of the tiles and makes the surface water-resistant and anti-slip. This product is frequently used in homes, commercial buildings, offices, and restaurants to keep the tiled floor protected, polished, and glossy.

Cleaning marble and ceramic tile surfaces requires different approaches because marble is a sensitive natural stone that can be damaged by acidic or abrasive cleaners. Here are separate methods for cleaning marble and ceramic tiles:

 Ceramic Tiles Cleaning 

  1. Sweep or Vacuum: Start by removing loose dirt and debris from the ceramic tile surface with a broom or vacuum cleaner.
  2. Mix a Cleaning Solution:
    • For a basic ceramic tile cleaner, mix warm water with a few drops of mild dish soap in a bucket. This solution is usually safe for ceramic tiles.
  3. Apply the Solution: Dip a mop or a soft sponge into the soapy water mixture and wring it out so it’s damp but not dripping. Then, mop or wipe down the ceramic tiles.
  4. Scrub Grout Lines: Use an old toothbrush or a grout brush to scrub the grout lines. If the grout is particularly stained, you can make a paste of baking soda and water and apply it to the grout, then scrub with the brush.
  5. Rinse: After cleaning, rinse the tiles thoroughly with clean water to remove any soap residue.
  6. Dry: Use a clean, dry cloth or towel to dry the tiles or allow them to air dry.

 Marble Tiles Cleaning 

Cleaning marble requires a more gentle approach due to its susceptibility to damage from acidic or abrasive cleaners:

  1. Sweep or Vacuum: Remove loose dirt and debris from the marble tile surface using a broom or vacuum cleaner.
  2. Mix a Gentle Cleaning Solution:
    • Combine warm water with a small amount of a pH-neutral or marble-specific cleaner. Do not use vinegar, lemon juice, or abrasive cleaners on marble.
  3. Dampen a Soft Cloth: Soak a soft, microfiber cloth in the gentle cleaning solution. Wring it out so it’s damp, not soaking wet.
  4. Wipe the Surface: Gently wipe down the marble tiles with the damp cloth, focusing on areas with stains or grime. Avoid excessive scrubbing or pressure, as marble is susceptible to scratching and etching.
  5. Rinse: Rinse the marble surface with clean water to remove any residual cleaning solution.
  6. Dry: Use a clean, dry cloth to dry the marble tiles thoroughly.
  7. Polish (Optional): To restore shine to the marble, you can occasionally apply a marble-specific polish or sealer .

marble and ceramics tile cleaner making product guide

You can wax the tiles at home easily by making the wax emulsion at home. Things needed and the way to produce this item is mentioned here.

To remove hard water deposits from these surfaces, pale tile and all spots making the best formula fill it in spray bottles and sell it online or at big shopping stores where huge people are waiting for this product.

Starting a marble and ceramics tile cleaner  business requires dedication, perseverance, and careful planning. Stay committed to delivering quality products, understanding your customers’ needs, and adapting to market changes to succeed in the long run. Good luck with your marble and ceramics tile cleaner making business!

Lets clean the kitchen shelves, stairs and bathroom tiles by wipe and clean method of marble and ceramics tile cleaner formulation.